External Wall Insulation is a thermally insulated, render protected, decorative exterior cladding which can be used to thermally improve and aesthetically transform solid wall masonry, system built non-traditional, low or high rise buildings.
Versatility, speed and simplicity are the characteristics of weber.them XP, the one-coat mineral render system using glass fibre mesh or expanded metal lath reinforcement is suitable for machine application. Unlike traditional multicoat systems, Weber’s expertise in mineral renders has resulted in a breakthrough concept – a one-coat, through-coloured mineral render which can be applied directly to all major insulation types.
weber.therm XM is a lightweight, thin-coat, polymer render system using glass fi bre mesh reinforcement, suitable for hand application. The first coat of render is 5-6mm and once cured a further 6mm of render can be applied and finished in a scraped texture or with dry dash aggregate. Alternatively primer and a simple synthetic finish can be applied directly on to the cured base coat in an array of colours and shades.
weber.therm XL is a heavyweight, thick coat, traditional render system using expanded metal lath reinforcement, suitable for machine or hand application. the first coat of render is 10-12mm and once cured a further 6mm of render is applied and finished in a scraped texture or dry dash aggregate. The top coat can also be completed with a primer and synthetic finish from a wide range of colours and shades.
weber.therm XB is a system using authentic brick-slips which are attached directly to insulation and fixed using a high performance polymer mortar. The mortar joints are then recreated using weber.rend BPM pointing mortar. Special ‘pistol’ returns on corners provide the realistic brickwork effect.